Language
DeutschEnglish
  • Home
  • Introduction
    • Safety
      • Mind with flammable refrigerants
        • Use of flammable refrigerants of the A2L safety classes and A3 (e. g. R1234yf or R290)
          • Work on systems with A3, A2L and B2L refrigerants
            • System design with highly flammable refrigerants
              • Suspicion of burnt refrigerant in terminal box
                • Dismounted components from systems with A3 or A2L refrigerants
                  • Used oil from systems with A3 or A2L refrigerants
                • Operation with frequency inverter
                  • Refrigerating capacity and system efficiency
                    • Application range
                    • Selection
                      • Selection with the Bitzer Software
                        • Compressor motors
                          • Special voltage motors
                          • Suitable protection devices
                          • Tandem and trio operation
                            • GSD tandems and trios
                              • GSD tandems with FI on each compressor
                                • GSD tandems with FI on the primary compressor (50 Hz)
                                  • GSD tandems with FI on the secondary compressor (50 Hz)
                                    • GSD tandems with FI on the primary compressor (60 Hz)
                                      • GSD tandems with FI on the secondary compressor (60 Hz)
                                        • GSD trios with FI on each compressor
                                          • GSD trios with FI on compressor 2 (50 Hz)
                                            • GSD trios with FI on compressor 2 (60 Hz)
                                            • GSP tandems and trios
                                              • GSP even tandems
                                                • GSP uneven tandems
                                                  • GSP mixed tandems
                                                    • GSP trios
                                                  • Electrical installation of compressor and frequency inverter
                                                    • Arrangement of the wiring
                                                      • LSPM motor
                                                        • Variable speed with power supply voltages ≥ 500 V
                                                        • Commissioning
                                                          • Configuration of the frequency inverter
                                                            • Start sequence
                                                              • Cycling rate and minimum running times
                                                              • Document as PDF