Coupling KS900 for OS.A95
Dimensions:
The KS900 coupling is available with different hub lengths on the motor side (dimension "E" in dimensional drawing) to ensure sufficient torque transmission. (Check torque transmission).
A | B | C | D | E | |
|---|---|---|---|---|---|
KS900, bore for shaft D55, | Ø 55 mm | 20 mm | 16 mm | 59.3 mm | 70 mm |
KS900, bore for shaft D60, | Ø 60 mm | 20 mm | 18 mm | 64.4 mm | 70 mm |
KS900, bore for shaft D65, | Ø 65 mm | 20 mm | 18 mm | 69.4 mm | 80 mm |
KS900, bore for shaft D65, | Ø 65 mm | 20 mm | 18 mm | 69.4 mm | 110 mm |
KS900, bore for shaft D70, | Ø 70 mm | 20 mm | 20 mm | 74.9 mm | 80 mm |
KS900, bore for shaft D70, | Ø 70 mm | 20 mm | 20 mm | 74.9 mm | 110 mm |
KS900, bore for shaft D75, | Ø 75 mm | 20 mm | 20 mm | 79.9 mm | 110 mm |
KS900, bore for shaft D80, | Ø 80 mm | 20 mm | 22 mm | 85.4 mm | 80 mm |
KS900, bore for shaft D80, | Ø 80 mm | 20 mm | 22 mm | 85.4 mm | 110 mm |
KS900, bore for shaft D20, pre-drilled, | Ø 20 mm | 20 mm | – | – | 70 mm |
KS900, bore for shaft D20, pre-drilled, | Ø 20 mm | 20 mm | – | – | 80 mm |
KS900, bore for shaft D20, pre-drilled, | Ø 20 mm | 20 mm | – | – | 110 mm |
Connection positions | ||
|---|---|---|
1 | Compressor side | |
2 | Motor side | |
3 | Compressor shaft | |
4 | Motor shaft | |
Dimensions (if specified) may have tolerances according to EN ISO 13920-B.
The legend applies to all BITZER couplings and includes connection positions that do not exist in every series.
If the motor is different, an individual design of coupling and housing is necessary!
Make sure that the torque transmission between the motor shaft and the coupling half in contact is sufficient (Check torque transmission).