General safety references

State of delivery

The condensing unit is filled with a protective charge: Excess pressure 0.2 .. 0.5 bar nitrogen.
caution

The condensing unit is filled with a protective charge: Excess pressure 0.2 .. 0.5 bar nitrogen.

Risk of injury to skin and eyes.

Depressurise the condensing unit!

Wear safety goggles!

For work on the condensing unit once it has been commissioned

Risk of electric shock!
danger

Risk of electric shock!

De-energise the condensing unit and secure against being switched on again!

For work on the electrical and/or electronic system: Check mains phases L1, L2, L3 for absence of voltage!

Compressors or other components of the condensing units may be under pressure!
warning

Compressors or other components of the condensing units may be under pressure!

Serious injuries are possible.

Depressurise all relevant components!

Wear safety goggles!

Surface temperatures of more than 60°C or below 0°C.
caution

Surface temperatures of more than 60°C or below 0°C.

Risk of burns or frostbite.

Shut off accessible areas and mark them.

Before performing any work on the condensing unit: Switch it off and let it cool down or warm up.

The fins of the condenser have sharp edges!
caution

The fins of the condenser have sharp edges!

Risk of lacerations.

Before performing any work on the condensing unit: Wear protective gloves.