Discharge gas temperature sensor

Remove the sealing plug and clean thread

• Rags and cloths
• 13 mm socket spanner

Screw in and mount discharge gas temperature sensor

• 14 mm socket spanner with long socket insert
• Torque spanner
• Tightening torque: 30 Nm

Wrap sealing tape around the thread of the discharge gas temperature sensor.

Plug in cable of discharge gas temperature sensor

• Screw on plug hand-tight

Connect cable cores to terminal strip CN3

• Slotted screwdriver

Terminal strip CN3, Terminal 1: BROWN: "Signal"

Terminal strip CN3, Terminal 2: BLUE: "GND"