Information

The BITZER CAD files are a free service of the company BITZER Kühlmaschinenbau GmbH. They may only be used or passed on completely and unchanged. Any changes are not permitted and infringe copyright.

All dimensions are given in millimetres. This must be taken into account especially when loading the files into CAD applications with other units of measurement. Set the CAD application to millimetres before importing!

2D dimensional drawings can be reduced in size, the factor can be found in the drawing header.

Disclaimer

These BITZER CAD files are merely to be considered as aids and are not a substitute for the necessary expertise and experience in the planning of refrigeration and air conditioning systems or heat pumps. We strive for constant maintenance and improvement, nevertheless we can neither guarantee nor assure that the BITZER CAD files are free of errors.

BITZER accepts no liability of any kind for the usability of the BITZER CAD files or their suitability for a particular purpose.

All liability for direct or indirect damage or consequential damage that might be caused by the use of the BITZER CAD files is excluded. This does not apply to liability for injuries to life, limb or health or instances of gross negligence or intent. By using the data, users agree to these terms. If you have any questions or suggestions, please contact:
BITZER Kühlmaschinenbau GmbH
Peter-Schaufler-Platz 1
D-71065 Sindelfingen
Tel.: +49 (0)7031 932-0
Fax: +49 (0)7031 932-147
email: bitzer@bitzer.de