Valve with bush DN40 (2 1/4'')

Valve (sketch) and bush (photo)

Dimensions:

Examplary sketch of a brazing and welding bush (applies similarly to other brazing and welding connections), showing the dimensions that are relevant for connection to the compressors, pressure vessels and piping:
A: Outside diameter at pipe insertion end
B: Inside diameter at pipe insertion end
C: Pipe stop diameter, stepped
D: Largest diameter at sealing surface, connection diameter e.g. to compressor, pressure vessel or valve
Details of valve with welding bush DN40 (2 1/4"). Diameters A .. C are those of the included bush (part no. 365 214 14).

A

Outside diameter at pipe insertion end

48,3 mm

B

Inside diameter at pipe insertion end

40 mm

C

Pipe stop diameter, stepped

─

Diameter of suitable copper brazing pipes

─

Diameter of suitable steel welding pipes

48,3 mm (DN40)

Nomenclature of valve body

PS33|DN40|S30|RX|2 1/4-12UN|2 1/4-12UN

Connections with the same dimensions are not necessarily interchangeable!

Connections with the same dimensions are not necessarily interchangeable!

There are often bushes, flanges, pipe connections or valves with similar dimensions, but they cannot necessarily be used with the same products (compressors, pressure vessels etc.)! Which connections are available for which product is listed in the corresponding tables.